Watch any movie about pirates or American gangsters, and there’s a reasonable chance you will see a cut-throat shave at some point. Used to great cinematic effect to portray dominance, the threat of violence and fear, the classic cut-throat shave has almost completely vanished from everyday life in Britain. But this primitive form of grooming is making something of a comeback.

A growing number of specialist barber shops are offering a cut-throat shave at a premium price. But there’s no need to splash the cash to enjoy this dying art. With the right equipment and know-how, you can perform your own cut-throat shave safely and effectively — in the comfort of your own bathroom.

Having the right tools for the job is every bit as important for personal hygiene and grooming as it is for doing construction work. They are just different tools!

Preparation

Your facial hairs will be easier to remove if your skin is warm and damp. It is therefore always a good idea to take a hot shower just before a cut-throat shave. Cleanse your face with a moisturising face wash, and exfoliate if you need to. With your face, still wet, apply a lubricating shaving oil before heading straight to the sink to start your shave.

Choose an unscented, moisturising shaving gel and apply it liberally to your face and the front of your neck.

Select a sharp, high quality blade

For a safe and close cut-throat shave, choosing a sharp, clean and high-quality razor blade is imperative. This is just you, some shaving gel and a simple, single-bladed razor, so you can’t afford to wing it without the best possible tools for the job. Get a feel for the blade beforehand, as you will need to proceed with accuracy and care when negotiating your ears and nose. If you’ve used the razor before, sharpen it with a strop before starting.

Get your angles right

There is a very small window of safety and effectiveness when it comes to the angle at which the blade meets your face. The optimum angle is between 30 and 35 degrees. If you’re wondering what that looks like, start by placing the blade flat on your skin. Using the sharp edge as a pivot point, gently raise the blunt edge of the blade by about five millimetres — and shave downwards using slow, smooth strokes. Any more than that, and you run the risk of cutting yourself. Any less, and you will tug at the hairs — pulling some of them out and inflicting a great deal of pain on yourself.

Tighten your skin

A cut-throat shave is definitely a two-handed job. With your weak hand, pull the area of skin you’re shaving until it is taut. This will reduce the risk of causing nicks and cuts and make the process a lot more comfortable. Always shave away from the hand that is holding the skin tight — preferably with the grain.

Smooth and steady does it

Shaving the same area of your face repeatedly will result in razor burn. It is therefore very important that you use slow, steady and deliberate strokes when shaving with a cut-throat razor. If your blade is sharp and in great condition, you’ll never need to shave the same area of skin more than twice. Keep each stroke very short in length — around one centimetre is ideal.

Use a brush to re-apply shaving gel

By re-applying shaving gel with a quality brush, you’re ensuring your skin and facial hairs are always moisturised. This minimises friction and reduces the chance of razor burn. In addition, the action of continually brushing your face ensures any stray whiskers are removed to make way for smooth, uninterrupted strokes with your blade.

Wash and check

You can’t be sure that you have caught every stray hair until you can see yourself clearly in a mirror. It is therefore essential that you inspect your face closely, preferably after rinsing it with warm water. It’s also important to keep your face warm at this stage, as you may need to touch up your handiwork before you finish.

Once you’re happy with your shave, rinse your face with cold water, and apply a moisturiser to keep your skin hydrated throughout the day.

There is something exciting and primitive about a cut-throat shave, but it is not without its risks. A quality Dorco razor has its blades firmly fixed at the perfect angle for safe shaving. With a handheld blade, however, you are in full control of the experience — so planning and a great deal of care is essential.

Quality razors need quality care. But before you think razor care is too time-consuming, try these tried and proven ways to keep your razors and blades in top condition.
Here are eight ways to clean your blades perfectly, get rid of stubborn hairs and prolong your razor’s life.

1. Always, Always Rinse

After two or three strokes when shaving, rinse it with water. Don’t wait too long, as hair and bacteria will build up during usage and start to clog the blades.

2. Use Steaming Hot Water

When rinsing, always run blades under hot water. Reheating them gets rid of unwanted bacteria and gunk. Make sure that the blade heats up before applying it to your skin, as a hot blade will cut your hairs more efficiently. Rinse the backside of your razor as well, rotating the razor head when rinsing it out. This helps the water to flow through every part of the razor, getting the hairs to drain easily. When you are rinsing it after a shave, check that all the excess cream is flushed out as well.

3. Try an Alcohol Soak

If you find hairs and bits stuck in your razors, you might need to try a deep cleanse. Rinsing your razor blades with alcohol can also help to sterilise and clean them, getting those tiny, gritty hairs out. Simply put some rubbing alcohol into a small cup, then place the head end of your razor and soak it for a few minutes. Then, slosh it around in a sink full of hot, bubbly water.

4. Brush It Clean

Another easy way to clean your favourite razor and rid it of unwanted hair is to use some basic soap and a nylon-bristled brush. If you don’t have one, use an old toothbrush to get into the cracks and eliminate bacteria build-up.

5. Use Your Dishwasher

Here’s a hack that may surprise you. Place your razor directly in the rack for silverware and let the dishwashing machine do the work of cleaning your razor thoroughly! If you find yourself worrying about bacteria, dirt and grime, the dishwasher can take care of any sanitary issues.

6. Use Clean Paper Towels to Pat — Not Rub — Your Razor Blade Dry

Keeping your razor blades dry after use and washing helps to keep them clean. Also, make sure they have no chance to breed bacteria in wet and warm spaces.

7. Run Your Razor Along Your Jeans

Everyone has a pair of denims in their wardrobe, but not everyone knows this little trick to care for razors. Slide your razor along the diagonal threads of your jeans about 10-15 times, first one way, and then in the opposite direction. Folks who use this method say they can keep a single razor sharp for up to half a year!

8. Use Your Forearm

This old-fashioned trick is one that many people swear by. At the time that you feel it may be getting dull, here’s a trick that needs nothing but your own arm: To prolong the life of your razor, slide it backward for about 10 strokes along your forearm. The bit of natural body grease actually helps smooth out your razor blades, making them stay sharper and last a lot longer.

So now that you found the perfect razors, you can take your grooming routine to the next level. By keeping them clean and gunk-free, you extend their life, save costs and even save time.

Let us know which of the above hacks you’ve been using in your daily shaving routines or how you best care for your razors. Check out our community pages, plus the wide range of razors, blades and special offers for smarter shaving at DORCO.

SHOP NOW

Top 10 Most Viewed Articles

6 brilliant things about kissing a man with a beard
A womans guide to shaving your face
The science of shaving how to pick the best razor for your shaving goals
T’is the season to bare with dorco eve
Do Women Find Men With Beards More Attractive?
Beard trends 2016 maintenance tips
How to prevent irritation when shaving your head
How to self shave the back of your neck
The best ways to shave in a hurry
5 Steps for Silky Skin